CA750 Quick Reset Procedure

Issue:

At times, the CA750 cart may need to be reset when the Full Reboot procedure does not work.

This procedure is only for the CA750 Cisco or Polycom enabled carts.

warning-yellow-attention-exclamation-marksmall.png If you have a Vidyo enabled cart, you must follow this procedure to prevent future codec issues.  

Parts List:

  • Paperclip or Similar.

Step By Step Directions:

  1. Power down any attached PC/Mac in the Optional PC cabinet. 
  2. Using the paperclip, press and release the reset button inside the pinhole on the left hand side of the console.
     Pinhole_Reset.png
  3. Wait 5-10 seconds. 
  4. Press the Power button on the right hand side of the console. Console_Power_Button.png
  5. Cart will boot normally. 

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request