Tactical Firmware v2.34 (Current Version)

V2.34

Release Date: 5/14/2017

Instructions (PDF Download) | Firmware: Upgrade File Package | Release Notes (PDF Download)

  • New Features, Improvements
    Support Cisco Telepresence SX20 codec software versions.
    • TC7.3.8.8b95796
    • TC7.3.7.01c84fd
  • Tactical Camera Update, due to the End of Life of the current camera.
    • New Camera Specs:
      • 1080p@30
      • 2.1 Megapixel
      • 1/3” CMOS Sensor
      • Field of View: 64.3° (D) x 55.8° (H) x 32.1° (V)
      • Tactical Firmware Ver. 2.34 is supported on both versions of the Tactical (with either the old or new camera).
  • Controller Communication Lost
    • If the controller loses communication with the codec, the codec video will now appear on screen (previously just the Avizia Logo would appear) and the following message will be displayed: Lost communication with the Codec. Check that “Serial Port > Login > Required is Off” from codec web interface
  • Monitor Role Switch
    • Hold the Self_View.png [Selfview] + Home.png [Home] buttons for 5 seconds to switch the monitor roles. This will make a second monitor (if connected to the HDMI output) act as the main monitor (displaying the user interface) and the Tactical monitor will act as the second monitor.
    • Hold the Selfview and Home button again for 5 seconds to switch back.
  • Infrared (IR) Control
    • If a Cisco PrecisionHD camera is connected to camera input on the Tactical, the camera’s IR control is enabled by default and the internal Tactical IR control will automatically be disabled. If the camera IR control is disabled in the camera settings of the codec, the Tactical IR control will automatically be enabled. When the camera IR is re-enabled, the Tactical IR will be disabled.
  • New Default Change.
    • Codec setting “xConfiguration Audio Input Line 1 VideoAssociation MuteOnInactiveVideo” is now
      set to Off.
    • Monitor setting (Single, Dual, or Auto) is now set to Auto.


NOTE: The Tactical firmware and Cisco TC software are two different software files and are loaded differently.
Please refer to Avizia web site support.avizia.com for all documentation on the Avizia Tactical.
For information on the Cisco Telepresence SX20 codec software please refer to the TC7 release notes.

Fixed Issues

  • N/A


Known Issues

  • To ensure full functionality of the Avizia products when registered to Cisco UCM, the following setting must be configured when adding the Avizia systems to UCM. In UCM, when adding a new phone, under the “Serial Port Settings” the “Serial Port Login Required” needs to be set to “Off” as this is required for the Avizia products to operate correctly. The Cisco UCM has this setting to “On” by default.

Serial_Port_Settings.png

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request